Search
JX-AC380V-200KW resistive AC Load Bank
Regular AC load bank testing of generators provides an essential health check service to prevent diesel engine failure due to wet stacking. Wet stacking occurs due to under loading of the genset which results in wet un-burned fuel building up in the engine. Junxy Energy offers the AC load bank which could meet your demands.

JX-AC380V-200KW AC Load Bank


It is really critical that your standby power system say UPS(uninterrupted power supply), battery bank, AC & DC generator, transformers, inverter etc working in good condition if switched to be loaded when the main power supply in maintenance procedure or stop abnormally. So validating the condition and output of such power systems must be conducted comprehensively. For regular maintenance task, the performance test and in-service test need to be made for at least one time yearly, it’s recommended by IEEE standard 450-2002

 

Features and Functions

--Test and display singe and phase-phase voltage, current, active powerapparent power, frequency, running time, energies of generatorsUPS and other AC sources.

--Set discharging time, timing to automatic shut-down load and alarm.

--Cutt-off parameters settings: load voltage, over voltageunder voltage and over current threshold value settings protection, over heating protection, automatic shut-down and alarm

--Parallel load function to have higher power load testing by RS485 communication, up to 99 sets could be parallel.

--Real time controlling discharge through PC software by RS232 connecting with load bank.

--On line monitoring functions: monitoring the EUT output single phase voltage, phase to phase voltage and frequency.

--Load discharging process is divide into at most 5 load steps with desired time interval, overall time up to 20 hours.

--Readjust discharge parameters during discharging process

--Up to 10 groups of discharge data could be saved in load bank.

--Power Fail Recovery function

--PC software for data/curves management, report printing.

 

Technical Specifications

Model

JX-AC380V-200KW (380V, 200KW)

Mains Voltage

Single-phase AC120V±10% or AC220V±10%, 50/60Hz

Rated Power

Stand-alone: Max 200KW (Three-phase 380V)

          Max 66KW (Single-phase 220V)

Parallel Operation: Sum of all stand-alone max power

Parallel Load Quantity

1~99 sets

Load Step

Maximum 5 load steps 

(Each step maximum 200KW three phase and maximum 66KW single phase)

Minimum Load Step Resolution

1KW

Load Voltage

Three-phase AC380V, Single-phase AC220V

Voltage Test Range

AC 0~450V, Display Resolution: 0.1V,Precision: ±5‰

Current Test Range

AC 0~200A, Display Resolution: 0.1A,Precision: ±1%

Frequency Test Range

45~65 Hz, Display Resolution: 0.1Hz, Precision: ±2‰

Power Test Range

0~200 KVA, Display resolution: 0.1KVA, Precision: ±1%

Temperature Test Range

-20~100℃, Display resolution: 1℃, precision: ±1℃

Discharging Time

0~(99 hours and 59 minutes)Continuously Adjustable

Recording Period

6~999 Seconds

Temperature Alarm &

Threshold Value

75℃

Cooling Mode

FCT(Fan control Temperature)

Communication Mode

RS232,RS485 and SD card communication

Display Mode

8 inch TFT

 

 

Condition of Circumstance

Working Temperature: (-20~55)℃        

Storage Temperature: (-45~70)℃

Relative humidity: 90%(40±2℃)

Atmospheric pressure: (70~106)KPa

Insulation Strength

Input≥AC1500V

Output≥AC500V

Load Bank Dimensions

Approx 800*850*1350mm

Net Weight

250kg

MTTF

≥50000h

 

Product Search
脚注信息
Copyright(C)2009-2012 Electronic equipment company