导航菜单
GUIDE
AC230V 15KW RLC Load Bank
JUNXY ENERGY series AC & DC load banks provide preventative test and maintenance solution to validate the output, reliability and stability of generator, UPS, battery bank, PV inverter, charging-pile and etc. regarding these products standard, delivery test & commissioning. JUNXY ENERGY entire excellent services including LOAD BANK design, manufacture, install, commissioning and maintenance, rental and field test services, to validate the faulted operating conditions and forecast the hazard.


Why need load bank testing

It is really critical to ensure that your standby power supply system say UPS(uninterrupted power supply), battery bank, generator, transformers, inverter etc which especially located in harsh, dusty or corrosive environment working in good condition, when you need them most, if switched to be loaded when the main power supply in maintenance procedure or stop abnormally.

 

Such power supply systems could fail without proper preventative maintenance. JUNXY provides a whole range of custom preventative maintenance products solutions for your UPS systems, generators and many more to ensure constant uptime for your power systems and make you prepared for anything. Downtime could also be reduced by regular maintenance and thorough inspections which are the key to power supply systems maintenance.

 

JUNXY AC load banks could help highlight a large range of faults on the power supply systems it test. The first goal achieved when testing with JUNXY AC load bank is to ensure your power supply system is reliable or not by validating the power systems’ outputs to its technical specifications. The underlying question that JUNXY series AC load bank could answer you is--“how is my power supply systems constant uptime(technical performance) ?” The load bank also tests that the power supply system is not faulty, no faults in construction and components reliable, that the aging of the power supply system is in line with expectations and that there are no pending breakdowns or early signs of wear and tear.

 

JUNXY RLC load banks are mostly used for inverter anti-islanding test experiments which meets the PV & grid inverter testing requirements for islanding prevention detection, work efficiency test, overload protection test, over-current protection test, power factor test, grid current harmonic test, resonance point test, and so on. Both Leading power factor (Capacitive) and lagging power factor (Inductive) could be available with JUNXY series RLC AC load banks.

 

JUNXY load bank control modes(remote control optional)

Two control modes available for JUNXY AC load banks: The local panel control mode and the remote control mode by PLC through PC software. Local control mode will be locked once load bank is switched to remote control mode. By applying the PLC, we could make load bank an intelligent test system, load power curve could be preset through PC software and all electrical parameters of EUT(equipment under test) including current, voltage, apparent power, active power, reactive power, power factor, frequency and warning info could be achieved automatically by the PC software and displayed by load bank digital meter.

Technical Specifications

Model

JUNXY-AC230V-15KW-RLC AC Load Bank

Load Element

Resistor, inductor and capacitor

Load Voltage

AC230V 3P4W & AC132V 1P2W

Frequency

50Hz/60Hz

Load Power

R=15KW, L=15KVar, C=15KVA

Load Steps

Resistive load, phase A/B/C load steps(W):

100, 200, 200, 500, 1000, 1000, 2000

(Each phase:100W-5KW adjustable)

Inductive load, phase A/B/C load steps(Var):

100, 200, 200, 500, 1000, 1000, 2000

(Each phase:100Var-5KVar adjustable)

Capacitive load, phase A/B/C load steps(VA):

100, 200, 200, 500, 1000, 1000, 2000

(Each phase:100Var-5KVA adjustable)

Power Factor

Leading and lagging power factor 0-1.0 adjustable

Load Accuracy

Resistor/capacitor: ±5%, Inductor: ±10%

Digital Meter

voltage, current, active power, reactive power, energy, frequency.

Mains Voltage

220V(±10%) 50HZ, single phase

Control Mode

Local control panel & remote control

Wire Connections

Bus bar for wire connections

Insulation Class

F

Protection Level

IP20(indoor use

Fan Noise

75dB

Cooling Mode

Force-air vertical cooling, by axial-flow fans.

Work Mode

Continuous work

Protections

Overheating/Buzzer alarm, Overheating, over voltage, over load protection, emergency stop button

Dimension

600*750*1563mm

Ambient Temperature

-10℃+50℃

Mobility

Four wheels

Humidity

≤95%

Altitude

≤2500 meters

PRODUCTS
PRODUCTS SEARCH
脚注信息
Copyright(C) JUNXY (HK) ENERGY CO., LTD
脚注栏目